bots.st/magicon-rf-design-engines
MagicON RF Design Engines
RF chain, antenna, PCB and compliance design
2065 ms
answered our call
- State
- Answered
- Protocol
- MCP 2025-06-18
- Tools listed
- 17
- Answered
- 3 of the last 3 calls
How to reach it
- MCP, HTTP
https://api.pcbgenerator.com/mcp/
What it can do
| Tool | What it says it does |
|---|---|
check_grounding | Check a draft passage against the engine results computed in THIS session. It returns every figure no engine produced, and every claim it checks that the results do not support or contradict (for example a solver score called a loss), each in `findings` with the reason. Run it before publishing or… |
compare_rf_chains | Multi-objective RF chain comparison: designs the primary chain with the convergent orchestrator, generates alternative chains by swapping components, scores every variant on cost / size / performance / DC power, and returns the ranked list with a Pareto frontier — the same engine as the Guided… |
design_patch_antenna | Design a rectangular microstrip patch antenna (and, when both nx and ny are given, a uniform planar array of it) using the Balanis cavity/transmission-line + array-factor model — the SAME engine behind POST /api/antenna/patch/design and the Guided Phase IV antenna panel. The substrate (dk/df/h)… |
design_rf_chain | Design a complete RF transmitter chain with the convergent orchestrator: selects the driver, PA, filter, and connector (the signal source is the user's input power by default — no VCO unless one is explicitly the generator), matches drive power between stages, inserts a pre-driver or attenuator… |
design_rf_receiver | Design or analyse a superheterodyne RECEIVER. Selects catalog parts for each slot (limiter, LNA, image filter, mixer, LO, IF filter, IF amp, step attenuator) and returns the frequency plan (image, half-IF, LO leakage), the cascaded noise figure, noise floor, MDS, sensitivity, SFDR and dynamic… |
design_tr_module | Design a T/R (transmit/receive) module that shares ONE antenna between a transmitter and a receiver. Designs both chains through the existing engines, selects the shared front end (a T/R switch, or a circulator with a receive-path limiter), and returns four safety budgets: TX-to-RX isolation… |
find_components_by_spec | Find real parts in the validated catalog that meet a spec: a part type, an operating frequency in GHz, and optional limits (noise figure, gain, P1dB, Psat, OIP3, insertion loss, temperature grade or range). Returns the matching parts, best first on the first limit, each with its headline figures… |
lookup_component_by_mpn | Look up an RF component in the validated catalog by manufacturer part number: the catalog's summary of its headline figures, not the full datasheet. Returns the frequency, power and gain ranges, package, datasheet link, and the headline figures (Psat, P1dB, gain, noise figure, OIP3, insertion and… |
run_compliance_analysis | Audit the solved stackup against PCB standards (IPC-2221, IPC-6012, IPC-4101, MIL, UL-94, RoHS, REACH): per-rule pass/fail with severities and remediation. Reuses the engine behind POST /api/compliance/check. Layers are derived from the solved stackup and standards default to IPC-2221 + IPC-6012… |
run_glass_weave_analysis | Recommend PCB glass-weave (fiber-weave) styles for the current design: ranks catalogued styles by impedance variation and cost for the design frequency and marks the cheapest one meeting the impedance tolerance. Reuses the Phase-24 engine behind POST /api/glass-weave/recommend. Frequency is… |
run_link_budget | Compute a cascaded RF link budget. For the chain just designed, call with NO arguments — the server derives stages and input power from the design (after a receiver it returns that receiver's own cascade; a T/R module keeps no stage list, so it is refused). Pass stages + inputPowerDbm only for a… |
run_ota_link | Compute a one-way over-the-air link budget — EIRP, free-space path loss (Friis), received power, link margin against receiver sensitivity, a closes/marginal/fails verdict, and the maximum range — using the SAME engine behind POST /api/ota-link/compute. Receiver sensitivity is reused from a prior… |
run_pdn_analysis | Run a PDN (power delivery network) impedance analysis: interplanar plane-pair capacitance, multi-cap decoupling impedance vs. target impedance, violations, and recommended decoupling caps. Reuses the Phase-25 engine behind POST /api/pdn/analyze. Inputs are derived server-side from the solved… |
run_planar_filter | Synthesize a passive planar (copper-on-PCB) filter from analytical formulas: stepped-impedance / open-stub low-pass, or parallel-coupled / hairpin band-pass, Chebyshev or Butterworth. Returns per-section line impedances (Z0e/Z0o for coupled sections), width/spacing, quarter-wave lengths, the total… |
run_radar_performance | Compute radar performance — the monostatic range equation (received power, SNR vs range, maximum detection range, coherent/non-coherent integration gain) and pulsed-waveform relations (duty cycle, unambiguous range/velocity, range resolution, blind speeds) — using the SAME engine behind POST… |
run_stackup_solver | Run the impedance-aware stackup constraint solver to find optimal PCB configurations. Use when the user wants ranked material/thickness/copper solutions for a given layer count and frequency. Returns scored and ranked feasible stackups. Each solution's prepreg_thickness_mm is ONE prepreg layer… |
run_thermal_analysis | Run a full PCB thermal analysis: via array Rth, junction-to-ambient stack, Kennedy spreading, Coffin-Manson barrel stress, Timoshenko warpage, and resin-flow estimation. Mirrors POST /api/stackups/{id}/thermal-analysis. Call with no arguments once a design exists: the server takes power_w from the… |
In its maker's words
TX/RX/T-R chains, OTA link, radar, PCB filters, patch antennas, stackup, thermal, PDN, compliance.
- Website
- pcbgenerator.com
- Publisher
- magiccadai
- Listed from
- the official MCP Registry as
io.github.magiccadai/magicon - Version
- 1.1.0, updated 9 Oct 2026
- Kinds of work
- Code and developer tools, Images, video and audio, Other work
The domain it lives on
- pcbgenerator.com
- registered 30 Apr 2025 (1 year ago), at HOSTINGER operations, UAB, its home page is a working site
From our own crawl of domain names: registry records and the home page as our crawler last saw it.
Every call we made
| When | What happened | Time |
|---|---|---|
| Answered | 2065 ms | |
| Answered | 2081 ms | |
| Answered | 503 ms |
Next door
Is this your bot? Claim its address to add a verified badge and keep the listing current.